With our 2 -bed lacquer pins you can quickly and easily repair small scratches and stone chips on your Tesla. Our 2-bed paint pen set consists of a main varnish and a clear coat. Due to the integrated brush in the lid of the paint pen, applying it in no time. For small scratches, a needle is also integrated with which you can work particularly finely. Suitable for Tesla Model 3, Model Y, Model S and Model X.
We offer our 2 -bed lacquer in the following colors:
- Tesla Pearl White Multi Coat (PPSW)
- Tesla Solid Black PBSB
- Tesla Midnight Silver Metallic (PMNG)
- Tesla Quicksilver (PN00)
- Tesla Stealth Gray (PN01)
- Tesla Midnight Cherry Red (PR00)
- Tesla Red Multi Coat (PPMR)
- Tesla Ultra Red (PR01)
- Tesla Deep Blue Metallic (PPSB)
- Tesla Glacier Blue
Application tips:
Preparation: The damaged area must be cleaned thoroughly before the repair. First, carefully remove the rust and coarse dirt. It is important to ensure that the surrounding vehicle paint is not damaged. Then remove fine dirt with an ear fabric and silicone remover (if not available, with a washing petrol). In the case of rusted areas, the prior treatment with a rust converter such as Tannox is recommended.
Apply colored paint: Shake the paint pen a minute before use so that the color particles spread evenly. After opening the brush on the paint pencil bottle or dab plastic or glass on a piece of plastic. This is necessary to remove excess paint from the brush, which would lead to a thick, uneven color application. Duck the paint onto the area to be repaired (do not paint, otherwise streaks are created). Make sure that the paint is applied very thinly.
If the paint is only damaged at a very small area, e.g. B. in the event of a rockfall, use the needle to apply only small paint portions. Do not press on the needle, but put the bottle together. If the scratch to be repaired is very deep, the process can be repeated two to three times. Make sure that the lacquer layer below has dried. You should plan for at least 15 minutes per layer of paint.
Apply clear varnish: Paint pen before use not shake! After opening the brush on the paint pencil bottle or dab plastic or glass on a piece of plastic. This is necessary to remove excess paint from the brush, which would lead to a thick, uneven color application. Duck the paint onto the area to be repaired (do not paint, otherwise streaks are created). Make sure that the paint is applied very thinly.
If the paint is only damaged at a very small area, e.g. B. in the event of a rockfall, use the needle to apply only small paint portions. Do not press on the needle, but put the bottle together.
Optionally grinding: After curing the clear coat (at least 12h, better 72h), the repair site and the surrounding area can be sanded wet with a 2000 or 3000 water grinding paper. Then clean the area thoroughly with a lot of water. This step is primarily intended for large -scale damage.
Open up optional: As soon as the surface is sanded smooth, the entire area can be polished. Before polishing, the edited areas must have dried well, otherwise the new varnish can be damaged when polishing, the friction of a polishing machine or by hand. If everything has been carried out properly, the repair site should be practically invisible.
Temperature: The ambient temperature at work should be between 13 and 25 degrees Celsius. Direct sunlight should be avoided. As a result, the car paint can dry out too quickly in places. If the paint has temperatures below 10 degrees Celsius before processing, it can also be carefully warmed up with a hair dryer, otherwise the paint applied with the paint pen will not be correctly connected to the old layer of paint. The paint pen itself should always have a temperature of approx. 20 degrees Celsius and never be exposed to frost.
Warnings: The self -repair of a paint damage with a paint pen can be very good, but does not replace the visit of a professional paint workshop. The paint pen set is always used at your own risk. The user is liable for damage caused by the use of the paint pen on the vehicle. Car paint should never come into contact with your eyes or mucous membranes. When working with paint pins, it is advisable to wear disposable rubber gloves. Don't keep car paint near children or animals.
Hazard information:


Color:
Danger!
Contains: N-butyl acetate, butan-1-ol.
H226 liquid and steam flammable.
H319 causes severe eye irritation.
H317 can cause allergic skin reactions.
H336 can cause sleepiness and drowsiness.
Wear P280 protective gloves. Carry eye or face protection.
P210 of heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
Avoid p261 inhale steam.
P264 Wash hands thoroughly after use.
P305 + P351 + P338, P310 When contacting the eyes: Rinse with water for a few minutes. Remove any existing contact lenses if possible. Rinse further. Call the poison information center or doctor immediately.
Store outside the range of children!
Clear lacquer:
Danger!
Contains: reaction mixture made of ethylbenzene, M-xylol and p-xylol, acetone, 2-method 1 methyllethyl acetate, hydrocarbons, C9 aromatics.
H226 liquid and steam flammable.
H319 causes severe eye irritation.
H315 causes skin irritation.
H336 can cause sleepiness and drowsiness.
Wear P280 protective gloves. Carry eye or face protection.
P210 of heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P260 dust/smoke/gas/fog/steam/aerosol do not inhale.
Avoid p273 release into the environment.
P301 + P310 when swallowing: Call the poison information center/doctor immediately.
P331 no vomiting.
Store outside the range of children!
Our brand 2befair stands for sustainably and at the same time fairly produced accessories for electric cars. Furthermore, we pay a lot of attention to an extraordinary good quality and transparency of our producers. To prevent long delivery routes and thus unnecessary Co2 emissions, our products are produced as regionally as possible.
As the first product under the brand 2befair we will offer our well-known rubber mats for the Tesla Model 3 and Model Y. Thus, we no longer have to import these rubber mats, but have them produced regionally. Our rubber mats already consist of 30% recycled material. But we are already working on increasing this percentage to make the product even more sustainable. Best of all, you get a 10-year warranty on our rubber mats!
In the future, many more products will follow under the 2befair brand. Our goal is to further expand and sustainably change the accessories market!With our brand 2befair we give you our brand promise! Let's do everything possible to think fair and sustainable together! For our environment!
For more information feel free to visit our website for 2befair, the brand for sustainable car accessoriesvisit. We are looking forward to your visit!