2befair rim lacquer for Tesla
2befair rim lacquer for Tesla
2befair rim lacquer for Tesla
2befair rim lacquer for Tesla
2befair rim lacquer for Tesla
Made in Germany

2befair rim lacquer for Tesla

€21,00
inkl. MwSt. zzgl. Versandkosten.
  • Improves curb damage and stone chips
  • Perfect color accuracy for Tesla rims
  • High opacity
  • Including brushes to apply
  • Quantity: 60ml
  • Made in Germany
vehicle: 18 "Aero Model 3 (until 09.2023)
18 "Aero Model 3 (until 09.2023)
19 "Sport Model 3 (until 09.2023)
20 "Induction Model Y
20/21 "Model y over -turbine of all construction years / model 3 to 09.2023
19 "Gemini Model Y (silver until 9:20224)
Ware auf Lager: Lieferzeit innerhalb Deutschlands 1 bis 3 Werktage, EU Ausland 3 bis 7 Werktage

  • Shipping: Free from 50€ to Germany and EU. For Switzerland and Norway free from 150€.

Description

With our 2 -bed rim lacquer pins you can quickly and easily repair curb damage and stone strokes on your original Tesla rims. The 2-bed lacquer pencil set consists of a base varnish and a clear coat. Due to the integrated brush in the lid of the paint pen, applying it in no time. For fine scratches or stone chips on the rims, a toothpick can simply be used to apply. All colors have a high opacity and are very color right.

We offer the 2 -bed rim lacquer for the following rims:

  • 18 "Aero Model 3 (until 09.2023)
  • 19 "Sport Model 3 (until 09.2023)
  • 19 "Gemini Model Y
  • 20 "Induction Model Y
  • 20/21 "Model y over -turbine all construction years / model 3 to 09.2023

Application tips:

Preparation: Before the repair, the damaged area is thoroughly cleaned and carefully remove gross dirt. It is important to ensure that the surrounding rim lacquer is not damaged. Then remove fine dirt with an ear fabric and silicone remover (if not available, with a washing petrol).

Apply the main varnish: Shake the paint pen with at least 30 seconds before use so that the color particles spread evenly. After opening the brush on the paint pencil bottle or strip on a piece of plastic or glass. This is necessary to remove excess paint from the brush, which would lead to a thick, uneven color application. Duck the paint onto the area to be repaired (do not paint, otherwise streaks are created). Make sure that the paint is applied very thinly. If the paint is only damaged at a very small area, e.g. B. in a stone chill, use a special paint swab or a toothpick to apply only small paint portions. If possible, try to apply very thin layers. If the scratch to be repaired is very deep, the process can be repeated two to three times. Make sure that the lacquer layer underneath is completely dry every time. You should plan for 20 to 30 minutes per layer of paint. The main paint takes 12 to 24 hours to dry.

Apply clear varnish: The clear lacquer is thicker than the main varnish and must therefore be processed particularly sparingly. A slight survey after applying the clear coat can be removed by grinding and polishing. After applying the clear coat, there must be at least 24 hours before the area can be processed further. However, 72 hours are recommended!

Temperature: The ambient temperature at work should be between 13 and 25 degrees Celsius. Direct sunlight should be avoided. As a result, the car paint can dry out too quickly in places. If the paint has temperatures below 10 degrees Celsius before processing, it can also be carefully warmed up with a hair dryer, otherwise the paint applied with the paint pen will not be correctly connected to the old layer of paint. The paint pen itself should always have a temperature of approx. 20 degrees Celsius and never be exposed to frost.

Warnings: The self -repair of a paint damage with a paint pen can be very good, but does not replace the visit of a professional paint workshop. The paint pencil set is always used at your own risk. The user is liable for damage caused by the use of the paint pen on the vehicle. Lacquer should never come into contact with your eyes or mucous membranes. When working with paint pins, it is advisable to wear disposable rubber gloves. Don't keep car paint near children or animals.

Hazard information:

Flammable Danger

Clear lacquer:

Danger: fluid and steam flammable. Causes skin irritation. May cause drowsiness and dizziness. Keep heat, hot surfaces, sparks, open flames and other ignition sources away. Do not smoke. Inhalation from dust/smoke/gas/fog/steam/aerosol. Protective gloves/protective clothing/eye protection/face protection. When swallowing: Call the poison information center/doctor immediately. Place the content/container of a suitable recycling or disposal device.
Dangerous components for labeling: N butyl acetate, xylol
GHS02GHS07

Un 1263
Information on VOC Directive 2004/42/EC:
62.36 % (580 g/l)
Sub -category according to 2004/42/EC:
Special back - all types, VOC limit value: 840 g/l
UFI: 6S3K-9JYF-3TQJ-Y9UX

Lacquer:

Attention: fluid and steam flammable. Causes skin irritation. Causes severe eye irritation. May cause drowsiness and dizziness. Repeated contact can lead to brittle or cracked skin. Keep heat, hot surfaces, sparks, open flames and other ignition sources away. Do not smoke. Dust/smoke/gas/fog/steam/aerosol do not inhale. Protective gloves/protective clothing/eye protection/facial protection/hearing protection. When touched with the skin (or hair): take off all contaminated clothes immediately. Wash or shower with water. When contacting the eyes: rinsing with water for a few minutes.
Remove any existing contact lenses if possible. Rinse further. Place the content/container of a suitable recycling or disposal device.
Dangerous components for labeling: N butyl acetate, butan-1-ol, n-butanol, n-butyl alcohol
GHS02GHS07

Un 1263
Information on VOC Directive 2004/42/EC:
89.16 % (839 g/l)
Sub -category according to 2004/42/EC:
Special back - all types, VOC limit value: 840 g/l
UFI: JK5T-HV36-1A9K-0SPR


Herkunftsland von diesem Produkt: Deutschland (mehr erfahren)
Bewertungen
Fragen

Our brand 2befair stands for sustainably and at the same time fairly produced accessories for electric cars. Furthermore, we pay a lot of attention to an extraordinary good quality and transparency of our producers. To prevent long delivery routes and thus unnecessary Co2 emissions, our products are produced as regionally as possible.

As the first product under the brand 2befair we will offer our well-known rubber mats for the Tesla Model 3 and Model Y. Thus, we no longer have to import these rubber mats, but have them produced regionally. Our rubber mats already consist of 30% recycled material. But we are already working on increasing this percentage to make the product even more sustainable. Best of all, you get a 10-year warranty on our rubber mats!

In the future, many more products will follow under the 2befair brand. Our goal is to further expand and sustainably change the accessories market!With our brand 2befair we give you our brand promise! Let's do everything possible to think fair and sustainable together! For our environment!

For more information feel free to visit our website for 2befair, the brand for sustainable car accessoriesvisit. We are looking forward to your visit!