BactoAttaQ Self-disinfecting surface protection
BactoAttaQ Self-disinfecting surface protection
BactoAttaQ Self-disinfecting surface protection
Made in Germany

BactoAttaQ Self-disinfecting surface protection

€9,90 €49,99
Spare jetzt 80%
inkl. MwSt. zzgl. Versandkosten.
  • Reduces 99.999 % of bacteria, viruses, fungi, algae and yeasts
  • Long-lasting effect of more than 365 days
  • Easy to use
  • Tested & certified
  • Dermatologically rated "very good"
  • Suitable for all non-absorbent surfaces
Ware auf Lager: Lieferzeit innerhalb Deutschlands 1 bis 3 Werktage, EU Ausland 3 bis 7 Werktage

  • Shipping: Free from 50€ to Germany and EU. For Switzerland and Norway free from 150€.

BactoAttaQ Self-disinfecting surface protection

BactoAttaQ Self-disinfecting surface protection

€9,90 €49,99

Baqtoattaq vehicle interior sealant is the ideal solution for long-term protection of the vehicle interior against bacteria. 

The innovative formula of the Baqtoattaq sealant forms an invisible barrier on the treated surfaces. This barrier provides long-lasting, self-disinfecting surface protection against bacteria. The invisible protective layer remains in place for more than 365 days and continuously reduces up to 99.999% of bacteria, viruses, fungi, algae and yeasts. The antimicrobial effect also permanently inhibits the formation of mold and odors caused by bacteria. Bactoattaq's technology won the German Innovation Award in 2019.

Advantages of Bactoattaq:

  • Tested and certified by recognized and international laboratories and institutes.
  • Dermatologically rated "very good"
  • UV, salt water and weather resistant
  • Easy to clean thanks to sealed surfaces

Instructions for correct application:

  1. For basic cleaning of the surface to be coated, first spray on "Phase 1 (Cleaner + Primer)". Then dry the surface with a clean paper or microfiber cloth.
  2. Spray the desired surface evenly with the "Phase 2 (Activator)" spray until it is completely covered. To avoid streaking, polish the surface thoroughly with a microfiber cloth. Note: Shake well before use!
  3. After 6 hours, the surface treated with Bactoattaq is fully cured and can be used again.
  4. The surface can then be cleaned with cleaning agents with a pH value of 4-10. If, contrary to expectations, streaks appear after application, the coating can be removed with cleaners outside the permitted pH value so that the streaks disappear. The areas should then be treated again with phase 1 + phase 2.
Herkunftsland von diesem Produkt: Deutschland (mehr erfahren)